I was wondering if anyone else is experiencing what can only be termed “highly unstable”
Morph performance via Bluetooth MIDI on Mac OS (Sierra) with Live 10.
Basically, super laggy, dropped/hung notes, etc. Also, there are actual Bluetooth connection
issues when connecting the Morph to the Mac to begin with, e.g. the Morph will sometimes disconnect by itself, though this comes and goes (sometimes it connects fine on a reboot of the Mac.)
This is on a Mac Pro trashcan that’s about 5’ away from the Morph. There are a Logitech MX Master 2S mouse and Apple bluetooth keyboard connected at the same time, if that has any relevance. I’ve reverted to the wired USB connection to the Morph for the moment, because of this. Any insight would be muchly appreciated.
While it may sound odd, have you tried multiple overlays to see if they all exhibit the same behavior? I ask because I found that using an MPE overlay with 14-bit CC enabled caused the Morph to choke up over only Bluetooth (not USB) and only report key releases and nothing else.
Do you have an external Bluetooth adapter you could test in place of the system’s internal adapter? As you mentioned the device is 5’ away. It’s possible that the Mac Pro doesn’t have great Bluetooth reception from inside its “can”. Using an external Bluetooth adapter could boost the sensitivity of the computer to drop less packets.
Thanks for the reply.
- I only have the Thunder overlay at this point, so can’t compare to the others just yet.
- I don’t have an external Bluetooth adapter but may look into this - thanks for the suggestion.
I am also having issues with connecting bluetooth to both my 2018 Mac mini and iPhoneXR. Connecting with bluetooth is inconsistent, and when it is connected, MIDI is dropped too many times to be useful. While plugged directly into the USB, I do not have any of these problems.
I’m having a similar problem with my iPad where chords are not recognized about 90% of the time. I’m using bluetooth and did not have this problem before a month or two ago. I’m keeping my fingers crossed that the next firmware update will fix the problem (it better!). Chords are recognized if I disable pitch bend, but that’s no fun.
My Morph works fine with my PC which is connected with a USB cable. For whatever reason I’m not able to connect to my iPad with a USB/Lightning cable - I thought that could before. Any way good luck getting your problem solved.