Hello Morph community! We know it’s been a while since there’s been a major update here. We are working to bring in additional support to address a lot of the great ideas/feedback you’ve brought up over the past year. Thanks a ton for your patience and passion for the Morph as we work to bring you the best experience possible. As always, we welcome all ideas and are excited to see/hear everything you do.
10 Likes
that`s good news, thankyou
please don’t forget to include:
1: PROGRAM CHANGE not only thru the small up and down arrows like now but by asigning discreet MIDI PROGRAM CHANGE numbers to any zone.
2: VALUE RANGES for any given control, from value n to value n, including allowing the same value for both “from” and “to”, so that specific values of any control can be assigned to a zone , with a system to allow multiple zones to be grouped to allow to switch between specific values of a given control number.
3: SENSITIVITY CURVES for any given control
choose between linear, logarithmic and exponential or even better with bezier curves, lines and points
4: TIME LAG to smoothen controls with an Attack time and a Release time
5: MULTI NOTE TRIGGERS along the Z dimension of a zone
so that different discreet note numbers can be triggered at specified threshold positions of the pressure
6: if what retain you to include all these functions is the fear to confuse your customers, just make a SIMPLIFIED EDITOR with an option for an EXPERT MODE editor for those who are not scared of complicated setups.
But i don’t believe that anyone willing to make its own configuration with the MORPH have any need to be protected from completeness, even if complicated…
thank you very much,
4 Likes
Thank you for sharing. Confirmed that these are all on our list.
nice !
thank you
i just wanted to add that if SENSITIVITY CURVES could be defined by bezier curves, lines and points, that would allow to scale values too, which would be extremelly powerfull.
i still hope for a preset function like in thunder for inovator overlay. so that i dont have to use a computer to change from one diy overlay to the other. thanks and greetings
thanks a lot for keeping it on top of the list 
Hi Matt,
Many DAW plugins use key switches to change articulations. In the case of spitfire audio, they use C-1 (C minus 1) and up for their key switches. While I can confirm other keyboards work in this midi note range, it seems that I cannot reduce sensel morph keyboard to below C1 (1 octave above C0). It would be very very helpful if this could be fixed in an update.
Thanks kindly,
David
